Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of the brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Switch of an alarm bulb of low level of brake fluid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

9.9. Main brake cylinder

Removal

PERFORMANCE ORDER
1. Disconnect a system drive rope a cruise control if it is necessary.
2. On models with the mechanical transmission disconnect a hose of the hydraulic drive of switching off of coupling from a tank of brake fluid.
3. Pump out brake fluid from a tank.
4. Turn off fixing nuts and disconnect brake tubes from the cylinder.
5. Disconnect the socket of connection of the fuel level sensor from a tank, turn off fixing nuts and remove the cylinder from the vacuum amplifier.

Installation

Installation is carried out upside-down removals.

Before installation of the cylinder remove from it air.




9710b8b3