Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of the brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Switch of an alarm bulb of low level of brake fluid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


9.3. System of anti-blocking of brakes (ABS)

GENERAL INFORMATION

The ABS system consists of two subsystems: electric and hydraulic. The electric subsystem includes four wheel sensors and an electronic control unit. The hydraulic subsystem consists of the hydraulic module, supports of brakes and brake tubes

Arrangement of an electronic control unit of ABS

ABS electronic control unit (it is specified by an arrow) is located under the left side of the dashboard.

Arrangement of the hydraulic module

The hydraulic module is located under the main brake cylinder.

Rapolozheniye of the ABS sensor on a forward wheel

 

Rapolozheniye of the ABS sensor on a back wheel

 

Codes of malfunction of the ABS system

In case of failure detection in the ABS system the electronic control unit includes the alarm bulb of ABS located on an instrument guard and keeps a malfunction code in memory.

For reading of codes of malfunction on models 1993-1997 of years of release connect the FBS and GND plugs of the diagnostic socket of connection.

Arrangement of the diagnostic socket of connection on the Ford Probe models of 1993 of release

 

Connect the voltmeter to the car TBS and "weight" plug. Include ignition and count number of deviations of an arrow of the device. For example, the code 22 will be removed as two long deviations of an arrow and two short.

On models of 1998 of release reading of codes of malfunction requires the special equipment.

Codes of malfunction of the ABS system

Code

Possible reason
11
Wheel sensor of the right forward wheel
12
Wheel sensor of the left forward wheel
13
Wheel sensor of the right back wheel
14
Wheel sensor of the left back wheel
15
Speed sensor
22
Right forward solenoid
24
Left forward solenoid
26
Right back solenoid
28
Left back solenoid
29
Brake hose of the right forward or left back wheel, hydraulic module
30
Brake hose of the left forward or right back wheel, hydraulic module
51
Safety relay
53
Drive relay
61
Electronic control unit
63
Accumulator / generator

Cleaning of codes of malfunction requires the special equipment.




9710b8b3