Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of the brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Switch of an alarm bulb of low level of brake fluid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


9.13. Height and free wheeling of a pedal of a brake

GENERAL INFORMATION

Measurement of height of a pedal of a brake
1. Regulator of length of a pusher and free wheeling of a pedal of a brake

2. Adjusting bolt of height of a pedal of a brake

Adjustment

PERFORMANCE ORDER
Brake pedal height
1. Measure brake pedal height.
2. For adjustment of height of a pedal turn off a lock-nut and tighten up an adjusting bolt.
3. Adjust the switch of fires of a stoplight.
Free wheeling of a pedal of a brake
4. Measure a free wheeling of a pedal of a brake.
5. For adjustment of a free wheeling of a pedal of a brake, turn off a lock-nut on a pusher of a servoamplifier and tighten up the regulator of length of a pusher and free wheeling of a pedal of a brake.
6. Adjust the switch of fires of a stoplight.



9710b8b3