Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
- 8. Coupling and half shafts
   8.1. Introduction
   8.2. Technical characteristics
   - 8.3. Coupling
      8.3.1. Coupling switching off drive cylinders
      8.3.2. Hydraulic system of the drive of switching off of coupling
      8.3.3. Coupling mechanism elements
      8.3.4. Release bearing and fork of the release bearing
      8.3.5. Adjustment of a pedal of coupling
      8.3.6. Blocking switch
   + 8.4. Half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


8.3.5. Adjustment of a pedal of coupling

GENERAL INFORMATION

Coupling pedal

1. Tighten up a rod of the main cylinder of coupling for adjustment of a free wheeling of a pedal.

2. Tighten up an adjusting bolt for adjustment of height of a pedal.

Coupling pedal height

Height of a pedal of coupling is a distance between a pedal and a floor.

PERFORMANCE ORDER
1. Measure coupling pedal height.
2. For adjustment of height of a pedal, turn off a lock-nut (A) and tighten up an adjusting bolt (V) as it is necessary.
3. Adjust the blocking switch.

Free wheeling of a pedal of coupling

The free wheeling of a pedal of coupling is a distance from the usual provision of a pedal to situation in which pedal resistance begins to be felt.

PERFORMANCE ORDER
For adjustment of a free wheeling of a pedal of coupling turn off a lock-nut on a pusher of the main cylinder of the drive of switching off of coupling and tighten up a pusher as it is necessary.



9710b8b3