Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. The cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. Sensor of temperature of cooling liquid
   4.8. Oil heater of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit of a heater and air conditioner
   4.12. Heater radiator
   - 4.13. Systems of air conditioning and heating
      4.13.1. Electric chain of coupling of the compressor of the air conditioner
      4.13.2. Moisture separator of the air conditioning system
      4.13.3. Compressor of the air conditioner
      4.13.4. Refrigerator of the air conditioning system
      4.13.5. Evaporator of the air conditioning system
      4.13.6. Broad nozzle of the air conditioning system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4.13.3. Compressor of the air conditioner

Removal
PERFORMANCE ORDER
1. Lower pressure in system.
2. Disconnect a wire of the minus plug of the accumulator.
3. Remove a driving compressor belt.
4. Lift and fix a forward part of the car. Remove protective guards of the engine.
5. Disconnect a wire(s), unscrew fixing bolts of tubes of coolant (V) and fixing bolts of the compressor (C).
6. Unscrew bolts and remove the compressor.

Installation

Installation is carried out upside-down removals.




9710b8b3