Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. The cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. Sensor of temperature of cooling liquid
   4.8. Oil heater of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit of a heater and air conditioner
   4.12. Heater radiator
   - 4.13. Systems of air conditioning and heating
      4.13.1. Electric chain of coupling of the compressor of the air conditioner
      4.13.2. Moisture separator of the air conditioning system
      4.13.3. Compressor of the air conditioner
      4.13.4. Refrigerator of the air conditioning system
      4.13.5. Evaporator of the air conditioning system
      4.13.6. Broad nozzle of the air conditioning system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4.13.2. Moisture separator of the air conditioning system

Removal
PERFORMANCE ORDER
1. Lower pressure in system.
2. Disconnect a wire of the minus plug of the accumulator.
3. Disconnect two tubes of coolant (A) and a wire (V) from a moisture separator.
4. In some models for connection of tubes special spring plugs are used.
5. Unscrew two bolts and remove a moisture separator.

Installation

Installation is carried out upside-down removals.




9710b8b3