Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines (1,6 and 1,8 liters)
   + 3.2. Petrol 4-cylinder engine (2 liters)
   + 3.3. Petrol V6 engine (2,5 liters)
   - 3.4. Partition of engines (1,6 and 1,8 liters)
      3.4.1. Introduction
      3.4.2. Technical characteristics
      3.4.3. Repair work without dismantle of the engine from the car
      + 3.4.4. Capital repairs of the engine
      3.4.5. Checks of the engine
      3.4.6. Removal and installation of the engine
      3.4.7. Preparation for a partition
      3.4.8. Engine partition
      3.4.9. Partition and check of a head of cylinders
      3.4.10. Repair of valves
      3.4.11. Assembly of a head of cylinders
      3.4.12. Removal of pistons and rods
      3.4.13. Removal of a bent shaft
      3.4.14. Check and cleaning of the block of cylinders
      3.4.15. Honingovaniye of cylinders
      3.4.16. Check of pistons and rods
      3.4.17. Check of a bent shaft
      3.4.18. Check of radical bearings and bearings of rods
      3.4.19. Engine assembly order
      3.4.20. Installation of piston rings
      3.4.21. Installation of a bent shaft
      3.4.22. Installation of a back epiploon of a bent shaft
      3.4.23. Installation of pistons and rods
      3.4.24. Launch of the engine after repair and a running in
   + 3.5. Partition of engines (2,0 and 2,5 liters of V6)
   + 3.6. Diesel engine 2,0 liters
   + 3.7. Systems of electric equipment of the engine
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


3.4.8. Engine partition

GENERAL INFORMATION

Details of the lower part of the 4-cylinder engine
1. Asterisk of a bent shaft
2. Forward cover (casing of the oil pump)
3. Casing of a back epiploon
4. Back cover
5. Oil pallet
6. Maslozaborny branch pipe and filter
7. Block of covers of radical bearings
8. Rod cover
9. Lower insert of the bearing of a rod
10. Cover of the radical bearing
11. Lower insert of the radical bearing
12. Bent shaft
13. Top insert of the radical bearing
14. Half rings of the persistent bearing
15. Oil jet
16. Top insert of the bearing of a rod
17. Piston rings
18. Lock rings of a piston finger
19. Piston finger
20. Piston
21. Rod
22. Block of cylinders

Fix the engine at the special stand, or on a floor.

Make sure that you have all necessary tools.

If you are going to touch completely the engine, it is necessary to sort and get it all internal details.




9710b8b3