Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


2.4. Check of level of oil and liquids

GENERAL INFORMATION

Engine oil

The probe for check of level of oil (it is specified by an arrow) is located on the right back side of the engine. Level of oil needs to be checked before a trip on the car or in 15 minutes after switching off of the engine.

PERFORMANCE ORDER
1. Get the probe and wipe the end of the probe. Insert the probe up to the end into a tube and again get it. Level of oil has to be between two lines on the probe. The difference in number of oil between marks in the probe makes about 1 liter. Add oil to the top mark if it is necessary.
2. The jellied mouth is located on a cover of the valvate mechanism. The cap of a jellied mouth is turned off counterclockwise. For the gulf of oil remove a cap of a jellied mouth, insert a funnel into a mouth and fill in oil.

Cooling liquid

On models since 1998 of release check that the level of cooling liquid was between the marks MAX and MIN in a tank wall.

PERFORMANCE ORDER
1. Regularly check the level of cooling liquid in a tank by means of the probe or marks in a tank wall. When the engine is heated-up, the level of liquid has to increase to the top mark. Add cooling liquid if it is necessary.
2. When checking level of cooling liquid also check its state. If liquid gained brown or rusty color, it is necessary to replace and wash out it the cooling system.

The washing liquid

The tank for liquid of washers of a windshield is located in a forward corner of a motive compartment.
The tank for liquid of washers of back glass is located in a luggage carrier. Check that the level of liquid was near the top mark in a jellied mouth. During the cold period of year use special nonfreezing cooling liquid.

Brake fluid and liquid of the hydraulic drive of switching off of coupling

The tank of brake fluid is located in front of the vacuum amplifier, and the tank of hydraulic liquid of the drive of switching off of coupling is located near a tank of brake fluid on a back wall of a motive compartment. Check that the level of liquid was between the marks MOVE and MIN in a tank wall. Add liquid of the required type if it is necessary.




9710b8b3