Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

2.27. Automatic transmission liquid replacement

PERFORMANCE ORDER
1. Pass on the car to warm up liquid of the automatic transmission.
2. Lift the car and install it on support.
3. Install the pallet under the transmission and turn off a cap of a drain opening. When liquid flows down, wipe a cap and establish it into place.
The Ford models with the CD4E transmission and Mazda with the LA4-EL transmission
4. Lower the car on the earth. Further see point 11.
The Ford models with the transmission 4EAT and Mazda with the GF4A-EL transmission
5. Turn off fixing bolts of the pallet of the transmission and remove the pallet. Remove old laying.
6. Pour out old liquid of the pallet, wash out the pallet solvent and dry up it. Do not forget to establish magnets on the places.
7. Turn off fixing bolts (are specified by shooters) and remove the old filter.
8. Install a sealing ring on the new filter, install the filter into place and twirl fixing bolts.
9. Establish new laying of the pallet and install the pallet on the transmission. Twirl fixing bolts till the required inhaling moment.
10. Lower the car on the earth.
All models
11. Get the probe for check of level of oil and fill in new oil in the transmission through a probe tube.
12. Start the engine and translate the switching lever through all provisions in turn. Again include parking transfer and check liquid level. Add liquid if it is necessary.




9710b8b3