Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


2.22. Check and adjustment of speed of idling (model till 1997)

Check

PERFORMANCE ORDER
1. Connect a tachometer. Connect the TEN and GND plugs of the diagnostic socket of connection. On the Ford Probe models with the four-cylinder engine disconnect the socket of connection of the air valve of system of idling.
2. Start the engine and warm up it up to the normal working temperature. Check that all electric equipment of the car was switched off.
3. Release a pedal of an accelerator and measure the speed of operation of the engine idling.

Adjustment

PERFORMANCE ORDER
1. On all models, except the Ford Probe models with the four-cylinder engine, connect the TEN and GND plugs of the diagnostic socket of connection (1).
2. For adjustment of speed of idling tighten up the adjusting screw. The screw of adjustment of speed of idling is located on the case of a butterfly valve.



9710b8b3