Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

- 1. Maintenance instruction
   1.1. Review of an interior
   1.2. Review of the dashboard
   1.3. Information plates of the car
   1.4. Automatic inclusion of transfers
   1.5. Councils for driving
   1.6. Dashboard
   + 1.7. Warning sound / light signals, headlights
   1.8. Screen wiper and washer of a windshield
   1.9. Screen wiper and washer of back glass
   1.10. Washer of headlights
   1.11. Anti-icer of back glass
   1.12. Flight computer
   1.13. Display of external temperature
   1.14. Hours
   1.15. Types of the air conditioning system
   1.16. Safety locks
   1.17. Identification number of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


1.12. Flight computer

GENERAL INFORMATION

1. Flight computer

The computer of flight is located on the forward console. It can show:

 – current fuel consumption;
 – average fuel consumption;
 – approximate distance which you can pass on the fuel which is available in a tank.

External temperature is shown at installation of the ignition key in the provision of ACC (I). (Address the display of external temperature).

For change of the mode of the display be convinced that the ignition key is installed in position of ON (II) then press the SELECT button (to choose).

Mode of the current fuel consumption

1. To establish
2. To dump
3. To choose
4. Current consumption

This function shows the current fuel consumption by calculation of the spent fuel and the passable distance.

At the choice of this mode on the display CONSUM.CUR (the current consumption) will be shown.

If you reduced speed approximately to 5 km/h, on the display will be shown – L/100 Km.

Average fuel consumption

1. To establish
2. To dump
3. To choose
4. Current expense

This function shows average fuel consumption by calculation of fuel and the distance passed from the moment of pressing of the RESET button (dumping) or from the moment of connection of the accumulator.

At the choice of this mode on the display CONSUM.AV (average consumption) will be shown.

For dumping of the shown data press the RESET button approximately for 1 second. After pressing of the RESET button on the display within one minute will be shown... L/100 km before fuel consumption begins to pay off and be shown anew.

The distance mode to emptying of a tank

1. To establish
2. To dump
3. To choose
4. On the remained fuel

This mode shows approximate distance which you can pass on the remained fuel. On the basis of calculation of fuel on the last 32 kilometers.

At the choice of this mode on the display REMNG which (remained) will be highlighted.

When the remained distance makes 50 kilometers or less, on the display is shown... L/100 km.

The distance display to emptying of a tank will not change after fuelling until you do not begin to conduct the car after gas station.

The display will not change if you do not add more than 12 liters of fuel.

If you had any problems with your computer of flight, consult with the authorized representative of Mazda.




9710b8b3