Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
- 11. Body
   11.1. Introduction
   11.2. Maintenance and repair of a body
   11.3. Vinyl finishing
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Replacement of a windshield and the neostarted-up glasses
   11.8. Replacement of a front grille (Mazda 626 model)
   11.9. Cowl
   11:10. Bumpers - removal and installation
   11:11. Forward wing
   11:12. The plastic panel before a windshield
   11:13. Panel of finishing of a door
   11:14. Doors
   11:15. Door lock, drum of the lock and handle
   11:16. Door glass
   11:17. Window regulator mechanism
   11:18. Rear-view mirrors
   11:19. Trunk lid (Mazdas 626 and MX-6 models)
   11:20. Lock and drum of the lock of a trunk lid (Mazdas 626 and MX-6 model)
   11:21. Ropes of opening of a cover of the luggage carrier / gate of the fuel tank
   11:22. Back door (Ford Probe models)
   11:23. Lock of a back door and drum of the lock (Ford Probe model)
   11:24. Basic racks of a back door / trunk lid (Ford Probe model, MX-6)
   11:25. Central console
   11:26. Panels of finishing of the dashboard
   11:27. Casing of a steering column
   11:28. Dashboard
   11:29. Sitting
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


11.3. Vinyl finishing

GENERAL INFORMATION

Never clear vinyl finishing with the help by detergents, the caustic soap or cleaners on the basis of kerosene. Simple soap and water work just perfectly, and a soft brush it is possible to remove old dirt easily. Wash vinyl finishing also often, as well as all car.

After cleaning use of high-quality protective equipment for rubber and vinyl surfaces will help to avoid oxidation and emergence of cracks. The protectant can also is put on a sealant of glasses, vacuum highways and rubber hoses which often fail as a result of chemical destruction, and also on tires.

Upholstery and rugs

Each three months remove rugs and clear the car inside (if it is necessary, do it more often). The vacuum cleaner clear an upholstery and rugs to remove the remained dirt and dust.

The leather upholstery requires special attention. Spots need to be deleted with warm water and very soft soap solution. Use pure rags to remove soap, and then again wipe an upholstery with a dry rag. Never use alcohol, gasoline, liquid for removal of a varnish or a thinner for cleaning of a leather upholstery.

After cleaning regularly process a leather upholstery special wax. Never use automobile wax for polishing of a leather upholstery.

Where the interior of the car is affected by sunshine, close leather seats sheets if the car is left in the sun during any time.




9710b8b3